LED Flasher Unit 3 Pin Relay LED Bulbs Fix Indicators flash rate plug & play CF13 JL-02

Product Information

Or would I have to wire pin 86 to green and pin 85 to light green and brown, so across the flasher relay? Why fit load resistors they defeat the whole object of less power. With our RDX LED Flasher Relay your Defender no longer needs Load Resistors!

PLEASE NOTE: We have seen many fake LED relays on the market. They look the same but have different components inside and the casing is made from an inferior plastic. We have even tested some where the positive and negative terminals were incorrectly labelled. Please ensure you have a suitable LED relay fitted to your Caterham when upgrading to any type of LED light. If you are towing a trailer, you may not have LED bulbs in the trailer: Our flashers will work with (and can handle the load from) incandescent bulbs, so you do not have to worry about burning out your flasher. We have tested many LED relays on the market and we have found this one to be the best. Some LED relays will work perfectly with either rear LED lights or front LED lights but not both! No two Caterhams are the same and we have found that after extensive tests (with the help of our customers) that the our LED flasher relay will work every time at the correct flash speed. This relay has been specifically designed to handle any LED/standard bulb combination. Where other relays fail, this one does not. I have a 1996 CB500 twin cylinder (N reg) Ihave bought a set of LED Indicators and they now all flash together (all four at the same time). What do I need to get them to behaveproperly? May 28, 2012 I have a suzuki bandit 600 2003. Would the replacement relay still have all of the other functions that oem relay has (i.e. side stand ,hazards warning lighs)thanks. October 8, 2011If your LED bulb goes out, you can simply go into any auto parts store and get a standard (non-LED) replacement bulb to get you going "legit" without burning up your flasher. These often only could handle 30 to 40 watts which is fine for all LED vehicles but as soon as you put a trailer on it would blow or the user would fit the relay with bulbs and blow the LED Flasher Relay.

We would perhaps suggest asking a qualified motorcycle technician for advise or perhaps log in to one of the Fireblade forums? Some people choose to fit load resistors to imitate the load of the incandescent (standard) bulbs that they have just removed. This results in more wiring, things may get hot and you are probably using more power than the standard bulb set up that you just replaced! Installing an LED flasher relay is the easiest way to solve the problem. The RDX 4 Pin Flasher Relay blows others in to the weeds, why as ours is tuneable this means it can be adjusted to suit your vehicle by simply turning the adjustment knob on top of the RDX 4 Pin Flasher Relay. Why does my existing electronic flasher not work with LEDs? For flashers, electronic only means that the flasher's internal timing (on-time vs. off-time) is electronically controlled, vs. thermal flashers that use a bi-metal strip. Electronic timing control means that the flash speed is constant regardless of the load (or two-speed for electronic flashers with lamp-out warning circuits).

For an indicator to stay permanently on orange, we would suggest an error with the wiringconnections.