Syncros Trail DH Fender Fox 40 49 black Mudguard

Product Information

The ProGuard - BOLT ON is our direct mount front mountainbike mudguard designed for big spray and mud protection (DISC BRAKE ONLY)

MINI & STANDARD COMPATIBILITY WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS:

Crud Products XL Front Fender 6. Crud Products XL Front Fender Pricey but worth it if you need to remove/attach frequently The best guards are the longest and work at all speeds. If you’re riding slowly, mud comes off the trailing edge of the tyre and is thrown upwards, but as speed increases it’s thrown further forward and you eventually ride into this spray. Having a mudguard that covers the full arc of mud trajectory is the best option. Use the Allen key provided to screw the bolts in EVENLY a bit each side, go gentle to start off to ensure you DON'T CROSS THREAD THEM, stop once it's pulled together so you can still move it

Our widely acclaimed Seal Shield offers greater protection for your fork seals from high velocity mud and spray lengthening service intervals MATERIAL If you find an item at a lower price with another commercial internet retailer, you will receive it from us at the same price, provided the conditions listed in the link are met.The benefits of EVOL are further enhanced by our new Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Specifications Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders Squeeze the side wings of the mudguard hard and slide under the fork brace from the rear with the wheel and tyre still in place