Creality 3D Ender-7 3D Printer

Product Information

With that out of the way, let’s talk about the specs. The Ender-7 is a filament based 3D printer from Creality. It has a build volume of 220 millimeters by 220 millimeters by 300 millimeters. It comes with a 0.4 millimeters nozzle, and uses 1.75 millimeters filament fed by a bowden extruder. If you aren’t versed in 3D CAD and building your own files, you’ll want to head on over to Thingiverse or one of the many other places to browse and acquire files for something you want to print. A bespoke 42-60 high-performance stepper motor suitable for rugged performance ensures high-speed operation. The product shape is derived from the structural form of the ancient building " Athenaeum ", and the most intuitive visual feeling is the magnificent ramification. Aimed at designers and hobbyists, Creality's fastest Ender is also equipped with a dual motor-equipped Core-XY structure with linear orbital positioning, allowing users to print at speed without sacrificing model accuracy.

It has a Core-XY gantry, which means instead of there being one motor for the X axis, and one motor for the Y axis, instead it has an intricate belt loop where two motors work together to move the hotend in the X and Y directions. This allows the motors to be stationary, and use the torque of both motors to control the hotend position. The gantry also uses linear rails for the x and y axis. These design decisions are what allows for the 250 millimeters per second print speeds.The extruder fan allows a more stable feed. High-speed material double fans are designed in a butterfly-shaped wing channel. Compared to a single fan, two fans increase the total air volume by 169%, providing rapid cooling for high-speed printing models. The Ender-7 comes partially assembled, and it took a little over an hour for me to assemble. Thankfully the most complicated piece, the core-xy gantry, was already completely assembled. All we have to do is screw the vertical pillars to the base, and bolt on the gantry. A few screws to attach the bed to the z-axis, and then some cable management and we are done! Each side of a triangle corresponds to only one corresponding angle and is unique. Therefore, the triangle is the most solid shape. Therefore, it is also the most mechanically stable. There are many other options in the firmware for setting up upgrades, tuning, and other features. Read through the files configuration section to see all the features we’ve put in the firmware for you. To avoid too much interference from the outside world, this test uses offline printing to record actual print speeds. Ender-7 actually print this vase model in only 23 hours, which is 7 hours faster than the estimated time, and the Ender -3 V2 printer actually took 40 hours to print the vase.

k06032022firmware.bin => prebuild klipper firmware for creality ender7 with the !!!!SAFETY CRITICAL!!!! intial pin configuration (set in .config above) to avoid the printer heated bed powering on at startup when no raspberry is connected) From the article on All3DP.com, there are 3 similar products: Creality Ender 6, Prusa MK3S+, and Two Trees Sapphire Pro In my opinion, this print test is successful, it saves me more than 14 hours, and the result comes out cheerful. Over I'm impressive by this ender 7. But if you are just planning print small model, you can find better solution in other 3D printer. That's said there will be not much visible advance when you print small model. The printer speed comes out when you printer the big project, and it will goes smoothly when the printer speed accelerate. Utilizing Core-XY structure, dual motors running parallelly with coordinated operations, faster speed, and higher precision.A: The Ender 7 does not come with an automatic bed leveling function. The printhead can be sent to five different points on the bed, though, and you will have to adjust the bed via the knobs yourself. As we all know, the most important for people to buy the Ender-6 is fast printing speed, just Imagine if there were a printer that could print faster than Ender-6.

Maintaining the minimalist aesthetic seen in previous Ender machines, the Ender-7 features the familiar dual support frame that continues to provide print platform stability. png => essential changes for klipper firmware build from make menuconfig (u could set these manually ore replace .config file mentioned above)

Conclusion

Load the file into the Slicer, select Ender 7 as your machine, PLA as the material (unless you’ve already chosen a different material) and then make any additional changes you might need for the specific print you’ve chosen. Most files have some notes about what settings to use. Performance Once the files are extracted you will need to open the folder in Visual Studio Code. You must open the folder named Firmware and not any other one. Failure to open the firmware at the correct folder level will result in it not working. If you want to see the print settings for any of the prints I mentioned, you can find links to 3D Print Log in the description below. Some of the side support and internal infill structures in this design show the precision that the Ender 7 is capable of.