KnitPro KP10872 Lace Blocking Wires, Pack of 15, Silver

Product Information

That’s a simplistic example which gives you an idea of the variation. It’s hard to be definitive about which projects will retain the best stitch memory, but it’s the kind of thing that becomes more intuitive with experience. So give it a try! You will see here that there are dips in the fabric between the pins. Carry on using your fingers to manipulate that fabric and place the next pins half way between the previous pins. Only once the shawl is TOTALLY dry, cut off the ends. You have spent a long time on this, so store it carefully. Fold it gently and place in a cotton bag (an old pillow case is fine) along with deterrents for your local pests. Alternatively, roll the shawl round postal tubes taped together. For a white shawl, you may wish to put a layer of acid-free tissue paper round the tubes first, and between the layers of the shawl. First, fill your basin with warm - never hot! - water and a bit of wool wash. Do not run the tap directly onto your knitwear, as it can weaken and break the fibres. Add your knitted piece to the warm water and leave it to soak. Make sure it is completely wet, but do not agitate it too much. This can cause felting.

To soak, submerge the fabric, gently squeezing out any air bubbles so that the piece can remain under the water without being held there. Never place any wool item under running water as this motion may felt or full the wool. The shawl is washed and then placed wet on the surface. Starting from the centre, the knitting is smoothed out and pinned in place. It is then left to dry for 24 hours longer than when it feels dry. The same goes if you are working with any other delicate fibre. Keep the heat / steam at a safe distance.Step 3: Spray the blanket with enough water to dampen it, then leave it to dry. Finally, remove the pins. Terms It is also used to evenly shape pieces; whether they are panels for a sweater or simple granny squares, finished items look a whole lot better if their parts are neatly shaped. It may feel counterintuitive, but do not put your first pins in the corners. Pin in the centre of the sides and keep opening up the fabric out towards the corners.

Step 3: Fill the spray bottle with spritz and cold water and spray the knitted fabric until it dampens. Do not soak the garment with water. It gives the knitted project a smooth and flat look, which improves your garment’s overall appearance.

Then pull out each scallop individually. If you need to use pins, make sure they are quilter’s pins – long, with a prominent head – so that you are less likely to spear your next guest. Carefully lift the soaked item from the water and gently squeeze out the extra water. Gently does it! Step 2: Use the hottest setting for the steam function on your iron, go over the knitted piece WITHOUT pressing down. That’s really important! Set aside at least a couple of hours. Weather is a factor. If you live in a place with dry sunny days, these are perfect for a large blanket outside on a big sheet. If outside drying isn’t possible, you’ll need a big space and a fan to help it dry. Wires come in a variety of weights. Some are thin and flexible — perfect along shorter curved edges — while others are a bit more sturdy and work well along the straightaways of a scarf or stole.

Step 8: Pin it out. You should measure the garment or use the pattern’s instructions and pin it out as you lay down the piece to ensure it is lying according to the desired shape. Step 3: Fill the basin or sink with cold water and add wool wash. Soak the scarf in water for thirty minutes.When pinning out, place the pins around a cm or more in from the edge to minimise this dipping, particularly if you are bringing quite a lot of stretch to the project . Once the shawl is in the bag, make it into a ball in the bottom, and squash the bag to remove as much water as possible. Now shake the shawl (still in its bag) and spin in the machine. I use the 900 rmp cycle.