Bedec - Barn Paint - Anthracite - Satin - 5 litres

Product Information

NOTE: Mahogany, Jacobean Walnut, Medium Oak and Dark Oak are semi-transparent, semi-gloss wood stains that stain the wood, rather than paint it a solid colour. Area Drying time will depend upon conditions – the manufacturer states the painted surface will be touch dry in 2 hours, recoatable after 4 hours at 18?C. Fully hardened after 1 month. Safety Information Apply by brush (we recommend the Rodo Prodec Premier Synthetic Paint Brush), roller or conventional/airless spray. It can be applied to previously painted surfaces.

Bedec Barn Paint is ideally suited to the protection of exterior buildings such as barns, stables, outbuildings, sheds, silos, windmills, and factory units (corrugated and metal box cladding). We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items

You may also like…

Unless otherwise stated, all deliveries will be made direct to your door. Our courier partners are not responsible for any additional lifting or carrying of your goods. This is the original Barn Paint from Bedec which was formulated initially for restoration work on Essex barns. Bedec Barn Paint in Anthracite can be applied to previously painted surfaces even those coated with weathered bitumen, tar varnish or creosote provided there are no loose powdery deposits. This acrylic system is a tough durable but flexible micro porous protective coating, with excellent colour retention.

It can be applied to previously painted surfaces, even those coated with weathered bitumen, tar varnish or creosote. Ensure good ventilation during application and drying. Wear respiratory protection if spraying the product.No need to etch or pre prime galvanised steel, Prime bare steel or rusty surfaces with Bedec Metal Primer.

Lightly abrade all surfaces to remove any grey, weathered wood and surface sheen from remaining coatings, and to open up the grain on new wood Paints onto pre-painted surfaces (even those coated with weathered bitumen, tar, varnish or creosote). Drying time will depend upon conditions – the manufacturer states the painted surface will be touch dry in 2 hours, recoatable after 4 hours at 18°C. Fully hardened after 1 month. Safety Information Plastic, metal, timber and smooth surfaces should be rubbed down with abrasive paper or equivalent. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful leadNew planed, finished wood or PSE wood should also be abraded to open the grain and allow maximum penetration Ease of application is another key feature of Bedec Barn Paint. With its smooth and creamy consistency, the paint glides effortlessly onto surfaces, ensuring a seamless and professional finish. Even if you're not an experienced painter, our paint makes it easy for you to achieve remarkable results. To get the best results, ensure surfaces to be painted are sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and chalky residue. Sand all edges of remaining coating until smooth.