DWE7485 Compact Table Saw 1850W 240V

Product Information

This table saw will allow you to adjust the angle of the blade from 90-degrees up and down to a maximum angle of 45-degrees. It has blade adjustments that are easy to reach and allow you to make small adjustments to the blade’s height without straining yourself. While the upper port had its minor issues, I was amazed by how well the bottom port collected chips when connected to my shop vac.

Adjusting the bevel of the blade is simple thanks to the easy-adjust miter gauge, which works in increments of 1-degrees; towards the table top on the right of the miter gauge is a micro-adjustment knob, which allows you to make those micro-adjustments to your bevel angle. You can get 24.5-inches of rip capacity to the right of the blade. That can handle four by eight sheets of plywood or OSB. Cabinetry could challenge that capacity if it is large enough in size. By registering the product under the DEWALT European PT 3 year guarantee the DEWALT product user accepts the terms and conditions specified above and that the product is excluded from the DEWALT 30-1-1 policy withdrawn 01-01-2016.The most commendable features were the easy-to-adjust pro-modular guard and the power reset switch to prevent accidental blade restarts. The first time I switched on this motor, I was amazed by its power and smoothness. It took absolutely no time to reach its no-load speed, proving to me just how efficient the design of the motor was.

It is very rare that a measuring aid from the manufacturer is so good that it makes specialized tools redundant. The accuracy of the system was so good that it eliminated the need for a measuring tape altogether. It saved me a bunch of time as I did not have to clean up the working area too extensively after finishing my cutting jobs. The miter gauge does not seem to be good (just like with other DeWalt saws), but you could just buy an aftermarket one or add some tape to the gauge bar. I absolutely love the Dewalt DWE7485 table saw for a number of reasons. It is lightweight, compact, and portable, giving me the flexibility of carrying it around when needed while having a rugged design for rough use. A table saw allows you to make a cross or rip cut on larger boards. Miter saws are limited to the reach provided by their arm, while a circular saw will drift off the line without a guide.

Shop the Dewalt DWE7485 Table Saw:

Apart from this, I will let you know what features attracted me and the few aspects of this product that let me down. If you’re not sure who this product was designed for, I will let you know the people for whom this saw is a perfect verdict. Meanwhile, the DWE7492 ’s bevel scale is super easy-to-read and is installed below the adjusting wheel. Thanks to this feature, I feel easier to see and control. I can create more accurate cuts with the DWE7492 model. The pinion fence rails make it incredibly easy to use, and they provide excellent support beyond the table surface. This keeps those heavier loads balanced between the table and rails; this ensures that those loads will not tip the table saw if they aren’t fastened to the bench. The tabletop is made from lighter compound metals, this is the first tabletop I’ve expedited using these compound metals, but this design element is what helps reduce the overall weight of the table saw.

The main downside to using a blade of this size is that it just can’t cut as deeply as a larger blade, your end up with a depth of cut of 2 9/16-inches at 90 degrees and 1 3/4 at 45-degrees. But this is still fine for those of you who need to do a 45-degree bevel cut in two-by-four framing lumber. There is a dust collector on both of them. The adapter allows you to connect a vacuum, yet it is not very helpful. It is easy to understand because sawdust keeps flying around. Nothing can capture all of them. Safety While you can use this feature if you are learning your way around the table saw and its features, I would recommend against it if you are looking for precision in your work.

The DeWALT DWE7485 Verdict

I will end this review with my verdict about this product, which should convince you if this saw is the best one for you! Features For me, they are both reliable table saws, and both will do you proud. You need to look over what it is you are looking to do, but both of these brands offer top-notch options; that said, DeWalt table saws tend to include a more powerful motor. A look at the DWE7485 DEWALT reserves the right to refuse any claim under this guarantee which in the opinion of the authorised repair agent is not in accordance with the stated DEWALT European Guarantee terms and conditions.

Stationary saws on the other hand are permanent installations. They are heavy and cannot be moved around. They offer a number of features and their usage can be expanded by adding accessories for different applications. The DWE7485 has a 2 1/2 inch dust port which will fit many shop vacs such as my Bosch shop vac VAC140A dust extractor; if you need to source a conversion kit to fit shouldn’t be difficult. Though you do need to keep an eye on the hose to make sure that it doesn’t interfere with the riving knife.

Cookie Notice

Anyone seeking a robust machine can’t miss DWE7485 since it runs a huge 15 amp motor and delivers the best-in-class speed of 5,800 rpm. Any kind of hardwood goes through without any issues.