VLAND LED Rear lights For 2008-2013 Golf 6 MK6 GTI GTD R TSI Tail Light With Sequential,Red and White,RHD(Driver is on the Right)

Product Information

Anyway, slave cylinder for the clutch has just went and its inside the gearbox casing so it looks like all my pennies are going to have to go towards that plus new clutch and flywheel while I'm in there! Many are designed to slide horizontally along special bracket pieces mounted underneath before coming completely loose, so move the bumper cover in this fashion first if you aren’t able to obtain specific instructions on your make and model. To understand how to read the volt meter in simple term: When the needle stays constant on high voltage, the wire that was pinch is a Running/Parking light.

Great thanks to supervisior Gillian who takes care of our stuff as well as helps whenever there are any office matters. If you managed to get together a set of those then you may be able to find adaptor cables to make it work with your car which had the halogens originally. Our factory has American DOT, European E-Mark and Chinese CCC certification to assure product quality.If you have received one of our products and would like to find the appropriate installation video to learn how to install it. Simply browse an extensive selection of the best golf mk6 led tail lights and find one that suits you!

We will make all of the electrical connections first, while we have access to the backs of the assemblies. Even if you’ve removed one or more connectors from the rear of the assembly before unbolting it, there may be others (such as separate wires to side marker bulbs) still attached which were previously obscured. Usually, either a simple squeeze on the edges of the connector or pulling up on a tab is enough to cause the connector to release its grip, but if a thin wire bar is present, it usually needs to be slid into an unlocked position first. User maunal*1, One pair of taillight (include left side and right side) This item has the same connections and wires with the original headlights.

When drilling out rivets, bits designed for drilling into metal are most suitable due to a higher heat rating.