Cryorig CR-H7A Tower Cooler For AMD/Intel CPU

Product Information

All-in-all, the process is simple because there are so few steps to complete, but the hardest thing is tightening the screws while holding the cooler in-place. PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH. Reddit and its partners use cookies and similar technologies to provide you with a better experience. Of course, the cooler features the unique for the company Hive Fin structure, which combines the Jet Fin Acceleration System and Turbulence Reduction, which means that the fins are designed as a bee hive shaped structure (the loose air intake) on the front side, and normal horizontal position (high density exhaust section) on the back side of the tower. While the base is slightly convex in shape, the entire surface has been milled in a half circular pattern, and the milling marks are left as the final surface texture.

The SilverStone AP181 – 180mm fans were connected to the chassis 1 and system connectors and were rotating at maximum speed. With the asymmetrical and inclined arrangement of the heatpipes, the heat sink is offset in such a way that it does not protrude over the RAM modules.With the Hive Fin arrangement, we find the front is flat while the sides and back edge carry the style of the black top plate and the caps covering the copper heat pipes. In this instance, the packaging is more than sufficient to deliver our sample of the H7 in terrific condition. As an effective anti-vibration measure, four rubber dampeners are embedded in the 120mm fan at the corners. They also brought forth an X-Bar mounting hardware system that allows the brackets to slide into position for AMD and any Intel socket the H7 is compatible with.

Billed as a ‘Hyper 212 EVO' killer, I have been itching to review the Cryorig H7 for a long time now. Also, the back plate protects the motherboard from excessive stress that may come from the mounted heat sink, and also provides a solid base for easy, fast and secure installation. I already have the cooler ready to be tested and reviewed, so let us waste no more time and check the package featuring the accessories and the cooling unit inside.

com with more than 15 years' experience in personal computers, server and storage systems, UPS, peripheral devices and software. In addition, the QF120 has four additional air vents on the case, which further increase the performance of the fan. I would first like to thank ASUS, InWin, Patriot, and Fractal Design for supplying products for me to test with. Even the ancient Zalman coolers that feel like you're about to snap your motherboard in half aren't as overly complicated as the DRP3.

At the opposite end of the H7, we find the fins have been pressed onto the heat pipes, but the other end of the pipes are soldered into the copper base. If you register your product with Cryorig, you can extend the manufacturer's warranty from three to six years. To test all CPU coolers, we devised an easily repeatable test with no variables other than the coolers themselves.Not gonna defend the H7 too much, because it is a PITA to mount, but after you've done it a few times, it gets better. The Bottom Line: While not a chart topper, the Cryorig H7 handles its business in a compact, Zero-Interference design, and does it well.

We can see through the open section of the side that the fins are already flat, and that they do close off the majority of the section to keep that 49 CFM inside of the cooler. If we are unable to plug the fans directly into the motherboard, it is specified in the performance section of the review. Total installation takes about four minutes, and that is from the time you open the box if the motherboard is already prepped and ready to go. It goes without saying that CRYORIG's rapid expansion and desire to offer high quality products has served them well thus far.

During that period, they have released an extensive lineup of CPU coolers and fans and have quickly made a name for themselves. Cryorig H7 offers an asymmetrical to the center of the cooler single tower heat sink with dimensions of 120(W) x 107(H) x 70(D) mm and featuring 40 x 0. mm and weight of 134g featuring an entirely painted in black square frame and entirely painted in white propeller with 11 narrow, but with very sharply angled blades providing airflow level range of 49 CFM and static pressure level of 1.