NIKE J Guard-Ce Soccer Shin Guards

Product Information

Carbon fiber shin guards possess protective qualities superior to those of commercial polypropylene shin guards. Although no fractures were observed, cracks occurred in front side of the artificial tibia similar to the results obtained in the study of Francisco et al. To generate comparable impacts, the pre-tensioning of the rig was calibrated by manipulating the turnbuckle. The impacts started at 800 N, until 2850-3000 N no change was observed in the artificial carbon fiber tibias. The adaptor at the lower end was fixed to the human-like SACH-type prosthetic foot applying the appropriate prosthetic technique.

In this context, using the appropriate material and applying the right geometry are important aspects of football equipment design (Adrian, 1996).

The difference between the impulse values of the commercial shin guards of comparable outer shells (PP) and padding material during the HIF trials can be attributed to the difference in designs. By using this setting, we measured the forces transmitted to the front of the tibia covered with soft tissue rather than the forces reaching the inside of the shin guard.

During LIF trials, the maximum force measured by the sensors attached in front of the tibia under the shin guard was 26. The Nike J CE Football Shin Guards are designed to provide protection and fortitude when out on the fields. Shin guards provide shock absorption and facilitate energy dissipation, thereby decreasing the risk of serious injuries. Dear Debra, Caroline and David Brass Family, I can't thank you enough for the exquisite volume of The Tempest. The Carbon-1 (EVA) shin guard tested in the low impact trials was damaged by non-experimental reasons (it was broken accidently during a transfer following a LIF trial) and therefore excluded from the high impact trial statistics.I have been in the rare and antiquarian book business for over forty years; my family has been in the rare books business since 1876. Artificial bones of spongiform structure made of condensed foam material (resembling the tibia anatomy) were manufactured and coated with carbon fiber.

Values from Load Cell-2 were monitored to guarantee that the pre-tensioning of the impacts remained within a certain range. In this study, the sensors were attached to the front of the tibia on the soft tissue covering the whole surface under the shin guard. During HIF trials, the maximum force values measured by the sensors attached to the front of the tibia under the shin guard were 143.The experimental setup had the following parts: 1) A pendulum attached a load cell at the tip (CAS Corp. It has been reported that fractures occurred even though shin guards were used (Ankrah and Mills, 2003; Boden at al. is an American multinational corporation that is engaged in the design, development, manufacturing, and worldwide marketing and sales of footwear, apparel, equipment, accessories, and services.