EVO-STIK Hard & Fast Metal Epoxy Putty, Sets Steel Hard in 10 Minutes, Colour: Grey, 50g stick

Product Information

Suitable for interior or exterior use, it is resistant to water, chemicals, and temperature extremes. Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.

Each 114g stick is 22mm diameter x 175mm long and contains resin on the outside and hardener running through the middle. Avoid using TFR (Traffic Film Remover) products as this may cause corrosion and invalidate the warranty. The product is supplied in stick form and therefore the base and activator component are premeasured. It also bonds to wood, glass, masonry and many plastics, making this a great solution for both heavy-duty industrial uses and DIY or hobby use in the home.Expedition items should be dry before closing but if packed wet, open again at earliest convenience to dry fully. Once the material has cured, it can be easily sanded and the normal paint application process follows - please follow paint manufacturers guidelines. Once cured, it can be tapped, drilled, screwed, sawed, machined, ground, filed, or painted, and does not rust. No open flames are needed anymore, heat sensitive car parts don't have to be removed as the products can fully be applied and cured at room temperature.

Superfast Epoxy Putty Repair Sticks supply epoxy putty in a pre-formatted stick for high-strength bonding and making quick and easy repairs to all materials. It will form a strong bond with most structural materials such as metal, glass, most plastics, wood, and dry concrete.

Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes for permanent repairs to many substrates. To use a Superfast Stick, you simply cut off the required amount of putty and knead by hand until the two contrasting colours blend into one to indicate successful mixing.

Simply break off the required amount of material from the stick and using gloved hands knead the product until the black and grey components become a consistent mid grey colour. Each handy stick contains pre-measured portions of activator and base throughout – no measuring or mixing tools are necessary.A steel reinforced metal epoxy putty, suitable for use with metals and most other types of materials. The material is suitable for application to manually prepared surfaces such as hand wire brush, sanding, mechanical grinding, or wire brush. There are many reasons why Quiksteel, the world’s toughest epoxy putty is a winner with the DIY enthusiast and the trade. Is multipurpose steel reinforced putty that is design for repairing, bonding sealing applications, the product is easy to mix in just one minute, to provide fast and permanent repairs.