About this deal
The test was performed in both scanning directions – horizontal X axis (left-right) and vertical Y axis (back to front) as the cutting performance is different in each direction because the dot has rectangular shape.
Fixed-focus laser: No need to rotate lens to focus, the focal length of the laser is a fixed value, move the lens up and down close to the surface of the object to start carving. Solid and easy installation structure design: The full-metal structure design makes the machine more solid, reduces machine vibration and improves engraving accuracy.The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. Make sure the safety screen is just above the material, or the beam may become slightly diffused and not as efficient. Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; the new laser focal spot is 50% smaller than other ordinary lasers, new laser combines precision engraving and high energy cutting at the same time.
Solid And Easy Installation :The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving. The laser focal length of is a fixed value, so move the lens up and down close to the surface of the object to start engraving.Speed and power settings for laser cutting and engraving can vary depending on the specific machine and material being used. At the same time the laser power of the fixed-focus laser is more stable than that of the zoom laser. Vector format is preferred format for these machines because it contains the paths around the shape edges on which the laser head tracks. Tried to make the same test on blue acrylic but it did not work as the blue color does not absorb the laser light well enough, probably the material is not dark enough or the blue color reflects the blue laser light and after 50 passes at 600mm/min with full power, the Atomstack A5 Pro also just melted the board a little.