Metabo KGS216M 1500 W 240 V 216 mm Sliding Mitre Saw

Product Information

Along with all the above-mentioned features, this Metabo saw also features a working light for good vision in low light. With the help of this light, it helps you to work even in dark properly. Verify that the folding blade guard is functioning properly. It should move freely and automatically cover the saw blade when the saw is folded up to the starting position. It should also allow unobstructed access to the saw blade without touching other parts when folded down. It’s rather annoying when manufacturers use so many different types and sizes of fixing on their tools. If they all used the same size hex bolt or crosshead screw, you wouldn’t need to fiddle around with different bits to get the saw to cut straight. The 8 inch blade gives a good all round cut size and comes with a 40 tooth blade that will give a nice finish. There are also other blades available for different finishes and cuts.

The METABO Mitre Saw KGS 216 M has a large cutting capacity thanks to sliding function for wide work pieces. The first test of the performance of this mitre saw is to find out how well it came set up from the factory. The next challenge is finding out how easy it is to adjust the angles and the laser guide if it’s not perfectly set up. The first most important factor you must consider is the quality of the blade of the saw. Good quality blades give you a fine and smooth cut. Blades that are not of good quality can damage the material. They also give inaccurate cutting and do not last for a long time. Nemá délkový doraz, při řezání více menších kusů stejných rozměrů (řezal jsem asi 180 kusů dubových pásků 20x5mm a 15x5mm) je to na hlavu a je nutno si pomoct jinak

You may also like…

We can easily cut different materials up to the depth of 65mm (2.5 inches). This depth is perfect for large construction work. It also cuts the fine pieces of large and hard timber material. A plus point is its cutting width is 12 inches. In addition to this, the Metabo mitre saw offers you a good cutting width of 305mm (12 inches). It cuts the hard and large wood planks with ease and gives you smooth sliding with better quality. Moreover, it comes with a precise turntable, so that you can have precise and accurate planks of materials. Last but not least, this cutter has a cutting depth of 65mm (2.5 inches). Following are the dimensions of this mitre saw 82 x 42 x 38 cm. The company also offers some additional accessories along with the cutter for better working. An effective dust bag is also present along with a mitre saw. Features

Pokud požadujete naprosto rovné řezy na zlomky milimetru, je nutné při nastavování úhlů dělat testovací řezy a ladit pomocí úhelníku. Já nejčastěji řežu kolmo (0°) a stačí nastavit těsně za nulu (cca o +0,3 - 0,5°) a řeže to dostatečně přesně. Na kratších prknech jsem si toho nevšiml, ale při řezání terasovek širokých 143mm jsem zjistil, že při aretaci na 0° mám prkna na jedné straně o milimetr a kus kratší, tedy příčný řez není rovný a po položení několika prken bylo vidět od oka, že netvoří navazující linii. The output power of 1500 watts increases the worth of this mitre saw. It provides you with a good power to cut different materials easily such as timber, plastic, and coated panels. Moreover, this high power also allows you to use the saw for the long term without any issue. First, ensure that the saw blade is installed correctly. Follow the instructions if necessary and replace the saw blade according to the requirements and specifications listed in the user manual. Make sure to use only original parts and saw blades. When the motor is running but the saw blade is not rotating, the problem can be caused by a few possible reasons. Here are the troubleshooting steps: Svorka je nepoužitelný klump - nelze přitáhnout, nedrží a povoluje - na pravé straně je navíc její poloha limitována samotným motorem pily, který s ní v 90% kolidujeInstall a new blade, making sure that the arrow on the blade aligns with the arrow direction on the blade guard. The Metabo KGS 216 M is a powerful saw with an input power of 1500 W. It is equipped with a 216 mm blade diameter and a 30 mm blade bore. With an idle speed of up to 5000 RPM, this saw is designed to handle various cutting tasks efficiently. Already know basics? Jump on the third step. We would recommend reading the manual to have some knowledge about the mitre saw. Jednoduchá výměna pilového kotouče díky aretaci vřetena; není nutná demontáž výkyvného ochranného krytu. Verify the rotation direction of the saw blade. When viewed from the left (open) side, the arrow on the saw blade should correspond to the direction indicated by the arrow on the blade guard.

Amazingly, the brand offers some additional accessories suitable for cutter including 1 MPTKGS216M KGS 216M 200mm, 8in Sliding Mitre Saw, Carbide circular saw blade, 2 Table length extensions, 1 Workpiece clamp, 1 Tool for saw blade change, 1 Dust extraction adaptor, 1 Laser, 1 High guide prof. Ensure that the saw blade is securely tightened and does not vibrate or become unbalanced during use. Tighten the tension screw firmly using the supplied hex key. I immediately came across a bit of a problem. Supplied with the saw is a hex key with a Philips head screwdriver on one end. This works if you want to adjust the fence or change the blade but manipulating the laser guide and angle indicators was another matter entirely.The most noticeable feature of this mitre saw is its versatility. This saw can cut various materials including wood, plastic, and coated panels up to different widths and depths and in different shapes. This cutter comes with an 8 inches blade, and a 40 tooth blade that gives you better quality round-shaped cuts. Moreover, it also offers more cutting blades for different shapes. Test the operation of the saw blade manually by rotating it to different positions without touching other parts. The folding blade guard should provide unobstructed access to the saw blade without any obstacles.

Bez podložení jiným kusem dřeva má občas problémy s doříznutím posledního milimetru, dvou, kotouč na spodní hranu "nedosáhne"The Metabo KGS216M sliding mitre saw is an impressive cutting tool that can help you cut the wood like a knife in butter. It has an amazing cutting capacity, a unique design, plus it gives precise angle adjustment. This mitre saw has a dual input voltage capacity of 240 volts, which enables you to cut different materials. Also, the motor output power of 1500 watts offers you great power for cutting different types of materials such as timber, plastic, etc. Featuring a powerful motor, allows you to use the cutter for a long period without any issue.