Shelly Motion - disponibile da Aprile 2021 Wireless White

Product Information

Brightness information is provided in lux units and ranges from 0 to 100000 and provides 3 light levels available as triggers: dark, twilight, and bright. These can be also defined in the sensor’s settings so if you don’t like the specific values for each trigger you can change the ranges.

IMPORTANT! Direct sun light or close heating sources can trigger false motion detection. LED Indication Signals To control the sensitivity of the sensor you have a slider with 255 levels of sensitivity – you will definitely set it to activate on important events. As I don’t have pets, I can’t really verify how reliable this would be with having/not having pets trigger the sensor. Here are a few more sensors i made using this method. But in this case these yaml example are placed under the sensor section in your HA config not the binary_sensor section like the example above. sensor:...Below the Main Controls heading, observe the current room temperature, Shelly Device battery as a percentage, and light status of the room. Motion triggers can be associated with a schedule and brightness levels. Settings allow Shelly Motion2 to set the number of consecutive motion events (1-4) before the notification is issued and the timeout can be increased up to 1440 min. IMPORTANT: If the Device has not been added into your Wi-Fi network in 3 minutes, it will switch off. Press briefly the Reset button to start it again. Pressing the Reset button while the Device is in AP mode will turn off the Device. 3. Inclusion to Shelly Cloud In case device name and channel names are not set, the entity name will be generated by the Device Type, Device ID and Channel Number.

In my next article, I will show you how to use Shelly with NodeRED via REST and MQTT protocols so you can come up with nice home automation projects yourself without being dependent on Shelly Cloud. I also got 2 Shelly Duo bulbs to play with, expect more Shelly-themed articles soon! Missing one thing If Channel Name is set in the device, the integration will use it to generate the entities’ name, e.g. Kitchen Light Just like the original sensor, Shelly Motion2 is a WiFi-enabled sensor that links with a 2.4GHz network (or creates its own AP point for situations where wireless LAN isn’t possible). Shelly Motion 2 (left) vs Shelly Motion If Channel Name is set to the default value, the integration will use the Device ID and default channel name to generate the entities’ name, e.g. ShellyPro4PM-9808D1D8B912 switch_0.The Shelly Mobile Application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used stand-alone or with various other home automation platforms and protocols. There are two generations of devices. Both generations are supported by this integration. There are some differences in how devices should be configured and in the naming of entities and devices between generations. Shelly device configuration (generation 1)

Using the homeassistant.update_entity service for an entity belonging to a battery-powered device is not possible because most of the time these devices are sleeping (are offline). Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus. Shelly® devices can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet.If you think your Shelly devices are working correctly and don’t want to change your network/configuration, you can ignore the repair issue. Still, you must know you are giving up the best experience of using first-generation Shelly devices with Home Assistant. It’s not just a PIR sensor. Shelly Motion comes with an array of sensors capable of measuring motion, vibration and luminosity. Thanks to these customisations, you can use this PIR sensor to trigger lights or dial it in, to work with alarm systems without running into false positives. PIR The red charging indicator above to the charging port will be on while the Device is charging. The indicator will go off when the battery is fully charged. Tamper detection - 128 levels of vibration sensitivity will notify you about the slightest vibration and if someone moves or dislocates the sensor Shelly Motion 2 (the Device) is a high-sensitivity, ultra-low power consumption Wi-Fi motion sensor, which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years, and in active transmission (approx. 6 hours/day motion detection) estimated between 12 and 18 months without recharging.

If the cloud isn’t enough and you would like to have strict LAN control, using a web interface allows you to play with REST MQTT and CoAP. It looks like Shelly Motion remains present in the Cloud while MQTT is enabled, so this is a big step up from Shelly 1. What I really like about Shelly Motion2 is the fact that it comes with Shelly Cloud and a web interface. It means you get to choose how you take advantage of the sensor. In the typical scenario, where the sensor is connected to Shelly Cloud, you can interact with it via the app, connect it to Alexa and Google Home via relevant skills and use it as a trigger for motion, temperature range, vibration and light. Set the motion detection threshold (from 1 to 256) using the slider. A lower value sets higher sensitivity. See motion detection percentage above of the slider as you move it. And when the battery is exhausted you just have to recharge it using an USB-C cable which is also something new compared to the Shelly Motion 1 that offers Micro USB port for charing. Set the blind time of the motion sensor in minutes (from 1 to 1440) after the last detected motion.

The main sensor of the Shelly Motion2 – a highly customisable motion sensor capable of detecting motion up to 9m – is enough to cover most of the household areas. The minimum timeout for the motion is 1min, which may not be as impressive as a 1-sec timeout on ZigBee-based Aqara Motion P1, but the device comes with interesting trigger options.